#Ham radio deluxe setup templates serial#
#Ham radio deluxe setup templates manual#
#Ham radio deluxe setup templates code#

If your radio does not support Auto Detect, you will have to choose a matching speed for the current radio setting.ĬI-V - This is only used for ICOM radio interfaces.ĬTS - Enables CTS which is required for Kenwood models.ĭTR - Enables DTR line when the COM port is opened if required - usually for powering and interface cable. Speed - The choices presented here will depend on your radio choice above. Radio - Choose a model from the comprehensive drop down list of supported models from the company chosen above.ĬOM Port - The drop down list provides choices of Auto Detect, COM 1 and COM 2. Can be used for club demos and explorations without having to connect a radio. Standard choices are Elecraft, ICOM, Kenwood, Ten-Tec and Yaesu.ĭemo-o-Matic® - Choosing the Dem-o-Matic® company will provide a selection from K2, Orion, TS-2000, TS-480 and TS-570 demonstration radios. Explanatory text is provided but here is a general explanation of the options.Ĭompany - Select the manufacturer of your radio. On first start, Ham Radio Deluxe will display a setup window with a number of selectable options and parameters.

#Ham radio deluxe setup templates manual#

Check your manual to find out exactly what your setup requires and get it right. There are many sources of RS-232 information on the Internet. If you build up a level converter box, ensure that the required pin relationship between one end of the cable and the other is preserved. NULL Modem Cable - Pins 2 and 3 at one end are connected to pins 3 and 2 (respectively) at the other end. Straight Through Cable - Each pin is connected to a pin of the same number at the opposite end. For example, the manual for the Yaesu VR-5000 receiver specifies the crossover type of cable for cloning (copying the digital setup of one unit to another identical unit) and the straight through cable for receiver control. The variations will generally be in whether a level converter is necessary and whether a straight through or NULL Modem (or crossover) cable is required. There are a number of variations on the RS-232 connection. RS-232 cable between the computer and the transceiver - with or without a level converter.

#Ham radio deluxe setup templates serial#

ICOM CI-V interface which has a serial port (RS-232) connection to the computer, usually with a DB9 connector, a level converter, and a stereo 3.5mm connector to the transceiver.Ģ.

Read your manual to find out how it should be done.Īdditional explanation can be found by downloading the Interfaces.pdf file which is a basic guide to CAT and Audio interfacing.ġ. Most rigs these days will have special inputs and outputs for these functions.

Received audio from the transceiver needs to be routed to the soundcard and transmit audio from the soundcard needs to be routed to the transceiver. If you want to use PSK31 Deluxe as well, two audio connections are also required. Only commands provided by the transceiver manufacturer are available for the program to use.

The main program sends coded control commands to the transceiver and receives information back from it. Jan F.Before you can use Ham Radio Deluxe to control your transceiver, you need to give due consideration as to how it was designed to interface with the computer and this can be confusing for newcomers.chris on A low cost 600 watt ultra-linear amplifier.This Blog is mainly dedicated to Amateur Radio (Ham radio) and contains external articles and personal esperiences.

#Ham radio deluxe setup templates code#

IT System Engineer, recently started having fun with morse code and Raspberry Pi Licensed Amateur Radio operator in 1996 as IW5EDI, active member of ARI Firenze and ARRLĬlass 1970, married with two childrens, love experimenting and antenna home-brewing.